What if your beloved jewelry has a problem?
Question 1, the diamond does not flash
Measure
Diamonds are one of the most beautiful treasures in the world, and its colorful colors have always fascinated countless people, but diamonds, like other objects, are also dyed and dusted. Therefore, only careful maintenance can make it last forever. Diamonds are "lipophilic" and can easily contaminate the dirt and dirt on the skin. Even with high-quality diamonds, once they get into the hands of grease and dirt, the natural light will be instantly obscured.
Pour a little detergent into the bowl and stir it with warm water. Then put the diamond into the bowl and rub it with a soft brush. After the brush is finished, remove the diamond into a metal mesh or tea strainer and rinse it off with warm water. Dry it with a soft cloth. Dissolve the detergent into cold water at a ratio of 1 to 4. Dip the diamond ring into the solution for a few minutes, remove it and wipe it gently with a soft brush, then rinse it with the solution, then wipe it dry with a paper towel. But remember not to scratch the base of the diamond.
Question 2, the jade is eclipsed
Measure
If the jade is tarnished, the warm water for 30 minutes is the jade beauty maintenance method. Without adding any detergent, the clear water naturally penetrates into the delicate structure of the jade. During the soaking process, you can gently wipe it with a soft cloth. If it is a jewel with carvings, you can use a soft brush to gently brush the surface dirt, which will reproduce the brilliance like a hibiscus. Never use an ultrasonic oscilloscope with a clean diamond to clean the emerald. Ultrasonic vibration will make the jade structure loose.
Jade is also very afraid of high temperature. Long-term baking at high temperatures will increase the molecular volume inside the jadeite, causing the jade to lose its warm moisture, causing the germplasm to dry out and its color to become lighter. Therefore, when playing, cooking or steaming in the sun on a strong beach, it is best to remove the jade jewelry to prevent damage to the jade.
In addition, perfume is a must-have for women, but it is the enemy of jade jewelry. You need to pay attention to it when using it. Do not spray it directly on jade jewelry. The accumulated corrosion damage will affect the structure of the jadeite, causing the texture to be loose and chapped. Therefore, we must keep in mind the order of dressing, first make up and spray perfume, and then wear jewelry to avoid a higher concentration of cosmetics or perfume directly in contact with the jewelry surface.
Question 3, the pearl turns yellow
Measure
Pearl is an organic gem. If you sunbathe for a long time, the pearl will also produce "wheat skin color", and this "wheat skin color" is not a beauty but a kind of destruction for pearls.
Some people say that using toothpaste to clean jewelry? error! Because the toothpaste contains fine, high-hardness abrasive particles, these particles have a hardness of up to six or seven degrees (almost the same as crystal), so the result of cleaning with toothpaste is that the jewelry will be damaged. Gemstone surfaces that are harder than crystals, especially pearls, must be cleaned with toothpaste.
Some people say that it is king to put it in a sealed bag and protect it from light. error! Pearls need fresh air. If they are not worn often, they should be taken out every few months to let it breathe air. Otherwise, a white pearl can easily turn yellow. After wearing it, you should also wash it with a "warm bath", wipe it with sheepskin and put it in a place away from light and dry. Never use facial tissue, because the rough surface of the paper will wear pearls. Some substances that we are exposed to in our daily life or in food contain acids or bases of different concentrations. These different concentrations of acid-base chemicals are fatal to the damage of pearls, so our cosmetics and perfumes should be avoided as much as possible. Jewelry. If you are afraid of forgetting to go to the sink because of washing your hands and removing jewelry, a small jewelry box can be avoided, so don't bother, bring a small jewelry box with you.
Question 4, metal jewelry blackened
Measure
Metal jewelry attracts the hearts of fashion consumers with its beautiful appearance and hard features. However, many people spend a lot of money to buy jewelry, but they are not willing to wear it. In fact, wearing it every day is the maintenance method for these metal jewelry. Because the oil secreted by the human body can make the jewelry have a natural and lustrous luster. But what if the metal shows signs of turning yellow and blackening? At this time, first use a small brush to clean the fine seams of the metal, then use a soft cloth to gently rub the surface of the jewelry. The metal is just as bright as the "back to the original shape". Be sure to avoid cleaning directly with a hard brush or tissue. At the same time, it is recommended that you take off the gold and silver jewelry when you take a bath, wash your hair, wash your face, wash your hands, make up or do housework, so as to avoid the contamination of the surface of gold and silver jewelry by soap, detergent and bleaching chemicals. Loss of luster produces spots, while avoiding deformation and breakage, loss of loss, especially when all kinds of fine necklaces are not suitable for wearing during sleep and washing.
Thermoplastic Rubber Feet with Steel/Metal Support Bushing, also known as Rubber Bumpers Feet&Foot and Rubber Stopper Pad&Silicone Padded Forefoot, which is made of rubber +metal or steel material with screw or revets and produced by compression molding and die-cutting tool. Thermoplastic Rubber Feet with Steel/Metal Support Bushing, also known as Rubber Bumpers Feet&Foot and Rubber Stopper Pad&Silicone Padded Forefoot, which is made of rubber +metal or steel material with screw or revets and produced by compression molding and die-cutting tool.
Rubber Feet,Adhesive Rubber Feet ,Rubber Silicone Feet,Non-Standard Rubber Bumpe
Xiamen The Answers Trade Co.,Ltd. , https://www.xmanswerssilicone.com